Kenwood NEXEDGE NX-200 Function Reference page 502

20 OPTIONAL BOARD
20.2 VGS-1
• If the audio data recorded using Auto Reply Message is
played back:
The recording type (RM), time, date and the ID Name or ID of
the target transceiver appear on the main display.
• If the transceiver finishes playing back a Message:
"END OF MESSAGE" appears on the main display when the
transceiver finishes playing audio recorded on the last channel.
• If there is no audio data to play back:
"EMPTY" appears on the main display.
 Selecting the Audio Data
1
Press the Up or Down
to select recorded data.
The recorded data can be changed and played back while data is
being played back.
Refer to Selecting or Clearing Data from a List on page 42
selection methods.
FUNC (K)/Ver 4.00
key (NX-200/ NX-210/ NX-300/ NX-410/ NX-411), or press the
NX-200/ NX-210/ NX-300/ NX-410/ NX-411
NX-200/ NX-210/ NX-300/ NX-410/ NX-411
NX-200/ NX-210/ NX-300/ NX-410/ NX-411
for
NX-200/ NX-210/ NX-300/ NX-410/ NX-411
CONTENTS
Mobile
Mobile
Mobile
[ ] or [ ] key (Mobile)
Mobile
INDEX 468