Kenwood NEXEDGE NX-200 Function Reference page 199

8 NXDN CONVENTIONAL SYSTEM
8.10 Sending and Receiving a Short Message (Short Data Call)
2
Enter a Short Message.
A maximum of 100 characters can be entered. Refer to
or Deleting Characters on page 52
3
Press the Side 2 key (NX-200/ NX-210/ NX-300/ NX-410/ NX-411), the
switch.
The transceiver sends the Short Message.
"COMPLETE" appears if the Short Message is properly sent to
the target transceiver.
Note
For details on the information displayed on the main display during transmission in an NXDN Trunking system, refer to
during transmission on page
FUNC (K)/Ver 4.00
for entry methods.
207.
Entering
NX-200/ NX-210/ NX-300/ NX-410/ NX-411
Square
NX-200/ NX-210/ NX-300/ NX-410/ NX-411
NX-200/ NX-210/ NX-300/ NX-410/ NX-411
Mobile
key (Mobile), or the PTT
Mobile
Mobile
 Display
CONTENTS INDEX 165