Kenwood NEXEDGE NX-200 Function Reference page 425

15 GPS
15.2 GPS Position Display
Operating the Transceiver
1
Press the GPS Position Display
The transceiver enters GPS Position Display Mode. The transceiver automatically switches the position (latitude and
longitude) display and the altitude display approximately every 5 sec.
The following operations are identical even if the transceiver enters GPS Position Display Mode by a user pressing the Menu
key.
The following displays appear.
• Latitude and Longitude Display
"Degrees, Minutes" display
NX-200/ NX-210/ NX-300/ NX-410/ NX-411
• Altitude Display
Meters display
NX-200/ NX-210/ NX-300/ NX-410/ NX-411
• GPS Non-positioning Status Display
"---" appears on the sub-display if 5 sec elapse after the
transceiver receives any non-positioning data from the
GPS units and the transceiver becomes unable to
receive serial data.
NX-200/ NX-210/ NX-300/ NX-410/ NX-411
FUNC (K)/Ver 4.00
key.
Mobile
Mobile
Mobile
"Degrees, Minutes, Seconds" display
NX-200/ NX-210/ NX-300/ NX-410/ NX-411
Mobile
Feet display
NX-200/ NX-210/ NX-300/ NX-410/ NX-411
Mobile
"-" appears for all digits on the display if the transceiver
receives no location data from the GPS units, such as
immediately after the transceiver is turned ON.
NX-200/ NX-210/ NX-300/ NX-410/ NX-411
Mobile
CONTENTS INDEX 391