Kenwood NEXEDGE NX-200 Function Reference page 173

8 NXDN CONVENTIONAL SYSTEM
8.6 Initiating an Individual Call After Ensuring That the Target Party Is Available for Communications (Individual Call
Configuration using KPG-111D/ DN
• Configuring the Alert Tone (Individual Call) (Unit ID List) (
• Configuring the Alert Tone (Paging Call) (Unit ID List) (
• Configuring the Alert Tone (Individual Call) which is commonly used (
• Configuring the Alert Tone (Paging Call) which is commonly used (
Notifying the User with a Tone That a Call Request Has Been Initiated
(Call Request Tone)
The Call Request Tone is the function to sound a Call Request Tone from the transceiver when a call request for an
Individual Call (Individual Call Acknowledge Request) is initiated.
The Call Request Tone from the transceiver notifies the user that a call request for an Individual Call (Individual Call
Acknowledge Request) has been initiated. The user can initiate the communication after the call request has been
established.
Configuration using KPG-111D/ DN
Configuring the Call Request Tone to be enabled or disabled (
Notifying the User with a Tone That a Call Request Is in Progress
(Call Processing Tone)
The Call Processing Tone is the function to sound a Call Processing Tone from the transceiver until the transceiver
receives an acknowledgment message from the receiving transceiver, after the call request for an Individual Call
(Individual Call Acknowledge Request) is initiated in an NXDN Conventional system.
The Call Processing Tone from the transceiver notifies a user that the call request for an Individual Call (Individual Call
Acknowledge Request) is in progress. A Call Processing Tone stops when the call request is established, and the user can
initiate the communication.
After the call request for an Individual Call (Individual Call Acknowledge Request) is initiated, a Call Processing Tone
sounds from the transceiver upon the elapse of the time configured for Call Processing Tone Delay Time.
Configuration using KPG-111D/ DN
• Configuring the Call Processing Tone to be enabled or disabled (
• Configuring the Call Processing Tone Delay Time (
FUNC (K)/Ver 4.00
See FPRG 8.19.6 Unit ID List Tab)
See FPRG 8.19.6 Unit ID List Tab)
See FPRG 8.19.5 Conventional Tab)
See FPRG 8.19.5 Conventional Tab)
See FPRG 8.19.5 Conventional Tab)
FPRG 8.19.5 Conventional Tab)
See
FPRG 8.19.5 Conventional Tab)
See
CONTENTS INDEX 139