Kenwood NEXEDGE NX-200 Function Reference page 190

8 NXDN CONVENTIONAL SYSTEM
8.9 Sending and Receiving a Status Message (Status Call)
The Alert Tone (Status/ Short Message Call) sounds from the
transceiver and then the Status Message will appear. If Status
Message is longer than 14 characters, it is displayed by scrolling
the message from right to left.
The received Status Message appears on the main display for 3
sec and ID Name appears for 2 sec alternately if "Alternate" is
configured for Message Display Type.
• If the status is not configured for Status List or the Status
Name is not configured:
The status number appears.
• If the transceiver receives Emergency Status:
"EMERGENCY" appears on the main display.
FUNC (K)/Ver 4.00
Status Message Display (3 sec)
NX-200/ NX-210/ NX-300/ NX-410/ NX-411
Mobile
ID Name Display (2 sec)
NX-200/ NX-210/ NX-300/ NX-410/ NX-411
Mobile
NX-200/ NX-210/ NX-300/ NX-410/ NX-411
Mobile
NX-200/ NX-210/ NX-300/ NX-410/ NX-411
Mobile
CONTENTS INDEX 156