Configuring The Maximum Volume Level (Maximum Volume); Configuring The Offset Value For Volume Level (Tone Volume Offset); Configuring The Volume Level Of Various Tones (Tone Volume) - Kenwood NEXEDGE NX-200 Function Reference

6 SOUND
6.4 Functions Related to the Volume Configuration

Configuring the Maximum Volume Level (Maximum Volume)

Maximum Volume can be used to limit the volume level from exceeding the configured volume level even if the Volume
control is turned up.
This prevents a user from discomfort caused by an excessive volume level when wearing a headset.
Configuration using KPG-111D/ DN
Configuring the Maximum Volume (

Configuring the Offset Value for Volume Level (Tone Volume Offset)

Tone Volume Offset can be used to adjust how much the standard tone volume level can be increased or decreased from
the fixed volume position. This function can be used to adjust the volume level of a tone depending on the situation.
Configuration using KPG-111D/ DN
Configuring the Tone Volume Offset (

Configuring the Volume Level of Various Tones (Tone Volume)

Tone Volume can be used to adjust the volume level of various tones.
This function can be used to maintain the volume level of the tones at a constant level depending on the situation or mute
tones.
Tone Volume for the following tones can be configured using KPG-111D/ DN:
• Power-on Tone
• Control Tone
• Warning Tone
• Alert Tone
• Sidetone
• Locator Tone
Following are the types of tone volume that can be configured.
Tone Volume
Current The Tone Volume varies in conjunction with the current volume level.
1 to 31 The tone sounds from the transceiver with a fixed tone volume. Higher values result in greater volume.
Off The tone does not sound from the transceiver.
The tone volume varies in conjunction with the Fixed Volume key. (Refer to
Selectable
Level with a Single Touch (Selectable Tone Level) on page
Configuration using KPG-111D/ DN
Configuring the Tone Volume of various tones (
FUNC (K)/Ver 4.00
See FPRG 8.10.2 Common Page 2 Tab)
See FPRG 8.10.2 Common Page 2 Tab)
Table 6-11 Available Tone Volume
FPRG 8.10.2 Common Page 2 Tab)
See
Description
Changing the Tone Volume
95.)
CONTENTS INDEX 94