Kenwood NEXEDGE NX-200 Function Reference page 388

13 MDC-1200
13.1 Transmitting/ Receiving a PTT ID
 ID display example
NX-200/ NX-210/ NX-300/ NX-410/ NX-411
 ID Name display example
NX-200/ NX-210/ NX-300/ NX-410/ NX-411
 ID List number display example
NX-200/ NX-210/ NX-300/ NX-410/ NX-411
Upon the elapse of the time configured for Auto Reset Timer or by a user pressing one of the keys of the transceiver, the
main display reverts to the channel or GID display.
Muting the PTT ID Tone (PTT ID Mute)
PTT ID Mute is the function to unmute after a certain amount of time elapses when the transceiver receives an analog
signal. This function is used to mute data tones of the PTT ID (BOT) sent by the other party.
Refer to Muting the PTT ID Tone (PTT ID Mute) on page 307
Configuration using KPG-111D/ DN
• Configuring the Caller ID Display (
• Configuring the PTT ID Mute (Analog) (Conventional) (
• Configuring the PTT ID Mute (Analog) (LTR Trunking System) (
• Configuring the ID List (
FUNC (K)/Ver 4.00
See FPRG 8.18.2 General Tab)
See FPRG 8.18.4 ID List Tab)
for details.
See FPRG 8.3.4 Page 2 Tab)
See FPRG 8.7.17 PTT ID (Analog))
CONTENTS
Mobile
Mobile
Mobile
INDEX 354