Sending Gps Data Manually By Using A; Sending Gps Data Together With Operation Of The Ptt Switch (Gps Combination) - Kenwood NEXEDGE NX-200 Function Reference

Hide thumbs Also See for NEXEDGE NX-200:

Table of Contents

12 FleetSync

12.9 Sending GPS Data

Sending GPS Data Manually by Using a Key (Send the GPS Data)

GPS data can be sent manually by a user pressing the Send the GPS Data key. Or, pressing the Menu key causes the

transceiver to enter Menu Mode, and then the GPS data can be sent manually by selecting the "Send the GPS Data".

3.4 Using Menu Mode on page

Configuration using KPG-111D/ DN

Assigning functions to the PF keys on the transceiver (

The transceiver can send GPS data by adding the GPS data to the PTT ID (FleetSync) of the transmitting transceiver.

To use this function, PTT ID for GPS Combination must be enabled by using KPG-111D/ DN.

GPS data is added to the PTT ID as follows according to the configurations for PTT ID (Analog) and GPS Report Timing.

Timing for Sending the PTT ID on page

Configuration using KPG-111D/ DN

Configuring the GPS Combination (PTT ID) (

Configuring the GPS Report Timing (

FUNC (K)/Ver 4.00

Table 12-19 Timing for Adding GPS Data

PTT ID + GPS

Figure 12-8 Timing for GPS Combination (PTT ID)

FPRG 8.16.8 GPS Tab)

FPRG 8.12 Key Assignment Window)

PTT ID (Analog)

FPRG 8.16.8 GPS Tab)

Chapters

Table of Contents