Kenwood NEXEDGE NX-200 Function Reference page 413

14 DTMF
14.6 Using Autodial List
Operating the Transceiver
 Changing or adding data in the Autodial List
1
Press the Autodial Programming
The transceiver enters Autodial Programming Mode.
The following operations are identical if the transceiver enters
Autodial Programming Mode by a user pressing the Menu key.
2
Press the Up or Down
to select the target data from Autodial List.
Refer to Selecting or Clearing Data from a List on page 42
selection methods.
If data is newly added to the Autodial List, "BLANK" needs to be
selected. Although the following procedure describes the
operation with the displays that appear when changing data in the
existing Autodial List, the operation is identical.
FUNC (K)/Ver 4.00
key.
key (NX-200/ NX-210/ NX-300/ NX-410/ NX-411), or press the
NX-200/ NX-210/ NX-300/ NX-410/ NX-411
for
NX-200/ NX-210/ NX-300/ NX-410/ NX-411
NX-200/ NX-210/ NX-300/ NX-410/ NX-411
CONTENTS
Mobile
[ ] or [ ] key (Mobile)
Mobile
Mobile
INDEX 379