Kenwood NEXEDGE NX-200 Function Reference page 33

CONTENTS BY PURPOSE
Functions for LTR
Trunking System
Security
Functions of Trans-
ceivers for Vehicles
FUNC (K)/Ver 4.00
Making a Selective Call Using Signaling
A user can initiate a selective call using signaling
such as FleetSync and DTMF. Message communi-
cations including status messages and short mes-
sages are also available by using FleetSync.
11.7 Using FleetSync to Initiate a Selective Call
11.8 Using DTMF to Initiate a Selective Call
Enhancing Communication Security
The transceiver is equipped with functions to
enhance secrecy in communications on each ana-
log channel and digital channel.
17 COMMUNICATION SECURITY
Using a Password to Protect the
Configuration Data of the Transceiver
To prevent the configuration data of the trans-
ceiver from being altered without the user's per-
mission, or to prevent the configuration data
written in the transceiver from being diverted, a
password can be set for the configuration data.
24.2 Password for Reading Configuration Data
in a PC (Read Authorization Password)
24.3 Password for Writing Configuration Data
(Overwrite Password)
Turning the Transceiver ON or OFF by
Linking with a Vehicle Ignition
For Mobile, the transceiver can automatically be
turned ON or OFF by linking with the status of the
port linked with the vehicle ignition by using the
ignition-linked function.
23.1 Turning the Transceiver ON or OFF by
Linking with the Ignition Sense Port State
(Ignition Sense)
Sending the GPS Data (Optional)
By using an optional GPS receiver unit, the trans-
ceiver can send its own location information to the
base station. GPS data can be sent by using
FleetSync in an LTR Trunking system.
12.9 Sending GPS Data
Page 298
Page 298
Using a Password to Protect the
Transceiver
A user can set a password to the transceiver so
that the transceiver cannot be used by others with-
out the user's permission.
24.1 Password for Transceiver Operation
Page 411
(Transceiver Password)
Page 499
Page 499
Turning the Headlights On of the
Vehicle or Making the Horn Sound
When the Transceiver Receives a Call
For Mobile, by using the horn alert function, the
transceiver can turn the headlights On of a vehicle
to which the transceiver is connected or make the
horn sound when the transceiver receives a call.
23.2 Controlling Car Behavior by Linking with
the Horn Alert Port State (Horn Alert)
Page 492
CONTENTS
Page 344
Page 498
Page 493
INDEX xxxi