Kenwood NEXEDGE NX-200 Function Reference page 562

APPENDIX
Functions Not Available with NX-200S/ NX-300S
Item
2-tone
Encode
Decode
FleetSync
Selcall
Status Message
Short Message
Timer Function
Interfleet Call
Status 80-99 (Special)
Manual Dialing
Auto Reset Timer
Caller ID Display
Message Display Type
ID/Message Stack with Time Stamp
Caller ID Stack
Status Message Stack
Short Message Stack
Latest Received Message Stack
Message Memory
Stack Mode
Operator Selectable Tone
Voice Scrambler
Optional Board Programming Mode
VGS-1
Auto Recording
Voice Memo (Manual Recording)
Auto Reply Message
Playback
FUNC (K)/Ver 4.00
• 2-tone Mode is unavailable.
• 2-tone codes can be sent by using the Call 1 to Call 6 keys.
Monitor of the Auto Reset Timer is always retained in the enabled state.
• Selcall Mode (including Paging Call) is unavailable.
• A Selective Call using the PTT ID is available.
• Status Mode is unavailable.
• Status Messages can be sent by using the Call 1 to Call 6 keys.
Short Message Mode is unavailable.
The clock function is unavailable.
• Interfleet Calls cannot be initiated by selecting a FleetSync ID from the ID List or
directly entering a FleetSync ID.
• Interfleet Calls can be initiated by using the Call 1 to Call 6 keys or PTT ID.
• The parameter of LCD is unavailable for Auto Reset Timer.
• Monitor of the Auto Reset Timer is always retained in the enabled state.
Remarks
CONTENTS INDEX 528