Kenwood NEXEDGE NX-200 Function Reference page 73

3 BASIC OPERATIONS
3.7 Viewing the Receive History (Stack)
2
Press the Up or Down
to select the message and then confirm the message.
Refer to Selecting or Clearing Data from a List on page 42
 Switching the message display
1
Press and hold the
The display switches as follows.
For Caller ID Stack:
ID Name  Received Channel or GID  Time Stamp  ID Name...
For Status/ Short Message Stack:
ID Name  Status/Short Message  Received Channel or GID  Time Stamp  ID Name...
 ID Name display
ID Name of the transceiver which was used for sending the
message appears. If Caller ID appears, a user can respond by
pressing the PTT switch. (Only if the type of the stored
message is Selective Call (Caller ID).)
 Channel or GID display
Channel or GID Name or Zone-channel or Zone-GID Name of
the transceiver receiving the message appears.
 Time Stamp display
The reception time of the message appears.
FUNC (K)/Ver 4.00
key (NX-200/ NX-210/ NX-300/ NX-410/ NX-411), or press the
Menu ([ ]) or [*] key while the message is appearing.
for selection methods.
NX-200/ NX-210/ NX-300/ NX-410/ NX-411
NX-200/ NX-210/ NX-300/ NX-410/ NX-411
24H Display
NX-200/ NX-210/ NX-300/ NX-410/ NX-411
CONTENTS
[ ] or [ ] key (Mobile)
Mobile
Mobile
Mobile
INDEX 39