Touchscreen Calibration; Find Z Home; Find Xy Home - Stratasys K6 Series User Manual

TOUCHSCREEN CALIBRATION

Pressing the Touchscreen Calibration button will open a dialog allowing you to recalibrate the touchscreen
display. See "Touchscreen Calibration" on page 209
Figure 4-36:

FIND Z HOME

Pressing the Z Home button instructs the printer to find its home location for the Z axis.
Note: This button can also be found within the Gantry/Stage Details page. See
"Gantry/Stage Settings" on page 99

FIND XY HOME

Pressing the XY Home button instructs the printer to find its X and Y Home locations. See
Calibration" on page 211
Note: This button can also be found within the Gantry/Stage Details page. See
"Gantry/Stage Settings" on page 99
Recalibrate Screen Confirmation Page
for more information.
for detailed instructions.
for more information.
for more information.
83
"XY Home