Stratasys K6 Series User Manual page 87

TIP WIPE ADJUSTMENT
Pressing the Tip Wipe Adjustment button will open the Tip Wipe Adjust Wizard page. Within this page you can:
•
Instruct the printer to set to its standby or build temperature
•
Command the head to move to the purge position
•
Initiate a tip wipe
The printer's current chamber temperature as compared to its standby temperature is displayed at the top of the
page.
Figure 4-32:
SET TO STANDBY TEMPERATURE
Pressing the Set to Standby Temperature button instructs the printer to set to its standby temperature. The
Chamber Temperature field will update to indicate temperature change progress.
SET TO BUILD TEMPERATURE
Pressing the Set to Build Temperature button instructs the printer to set to its build temperature. Build
temperatures are material specific. The Chamber Temperature field will update to indicate temperature change
progress.
Tip Wipe Adjust Page
78