Table of Contents
Advertisement
Support tip does not match selected job
•
The currently installed support tip does not match the support tip configuration of the selected job.
•
Correct condition - change tips by removing the incorrect support tip and installing a support tip
matching the job's tip configuration. See
instructions.
Model tip extrusion volume near limit
•
The printer's model tip is near its odometer limit (see
information). This limit is material dependent and is displayed within the two Tip Status Icons found
within the Tips page (see
•
Correct condition - you are still able to build using this tip, but part quality may be affected. Once the
tip's odometer limit is reached, you will be prompted to change the tip and will no longer be able to
build using the tip (see
Top Cover" on page 161
Support tip extrusion volume near limit
•
The printer's support tip is near its odometer limit (see
information). This limit is material dependent and is displayed within the two Tip Status Icons found
within the Tips page (see
•
Correct condition - you are still able to build using this tip, but part quality may be affected. Once the
tip's odometer limit is reached, you will be prompted to change the tip and will no longer be able to
build using the tip (see
Top Cover" on page 161
"Changing Tips or Material Type" on page 128
"Tip Status Icons" on page
"Using the Tip Change Wizard" on page 128
to change tips).
"Tip Status Icons" on page
"Using the Tip Change Wizard" on page 128
to change tips).
244
Table 3-4 on page 42
69).
and
"Changing Tips within the
Table 3-4 on page 42
69).
and
"Changing Tips within the
for
for approximate tip life
for approximate tip life
Advertisement
Table of Contents
