16.
A screen will be displayed allowing you to select the calibration part's location on the build sheet
prior to starting the build. The screen contains a graphic representing your printer's platen as well
as a blue bounding box graphic (the imaginary box surrounding the part). Select the calibration
part's build location by dragging and dropping the bounding box on the touchscreen; the
bounding box cannot be placed outside the limits of the platen. Press the Next button to proceed
with the wizard.
Note: The Select Calibration Part Location page is displayed regardless of your
printer's Enable Part Placement setting configuration (see
Placement" on page 87
for details).
146
"Enable Part