Stratasys K6 Series User Manual page 50

TIP COMPATIBILITY & SELECTION
Table 3-1 lists the materials available for use with the 380mc and their corresponding tips.
Table 3-2 lists the materials available for use with the 380mc Carbon Fiber Edition and their corresponding tips.
Table 3-3 lists the slice heights for each model tip.
Table 3-4 provides approximate tip life based upon the amount of material used.
The printer tracks tip use and automatically prompts you, via the User Interface, when a tip should be replaced.
Worn tips are prone to clogs and reduce part quality. See
information on viewing tip use status.
When changing tips, the printer will guide you through the process of resetting tip odometers using the Tip
Change Wizard (see "Using the Tip Change Wizard" on page
Table 3-1: Available Tips for Use with 380mc
Model Material
ABS-M30
ABS-M30i
ABS-ESD7
ASA
Nylon 12
PC
PC
PC-ISO
PC/PC-ISO
PC-ABS
Table 3-2: Available Tips for Use with 380mc Carbon Fiber Edition
Model Material
ASA
Nylon 12 CF
Table 3-3: Slice Height
Model Tip
T10
T12
T16
T20
T20C
Model Tip Support Material
T10, T12,T16, T20 SR-30, SR-35
T12, T16 SR-30, SR-35
T10, T12,T16, T20 SR-30, SR-35
T12, T16, T20 SR-110
T10, T12, T16 SR-100
T12 PC_S
T16, T20 PC_S
T10, T12, T16, T20 SR-110
Model Tip Support Material
T10, T12,T16, T20 SR-30, SR-35
T20C SR-110
Slice Height (in) Slice Height (mm)
0.005
0.007
0.010
0.013
0.010
"Tip Odometer Status" on page 178
128.)
Support Tip
T12SR30
T12SR30
T12SR30
T12SR100
T12SR100
T12
T16
T12SR100
Support Tip
T12SR30
T12SR100
0.127
0.178
0.254
0.330
0.254
41
for more