Table of Contents
Advertisement
BUILD STATUS DISPLAY
The upper portion of the Build Status Display shows the following build information:
•
The build's percentage of completion is displayed as a numerical percentage just above the build's
layer completion information.
•
The number of completed layers as compared to the total number of layers in the build is displayed
just below the build's percentage of completion.
•
Elapsed build time as compared to total build time is displayed just below the build's layer completion
information.
The finish time displayed within the lower portion of the Build Status Display will vary slightly depending on
whether the printer is idle or building:
•
When idle, the estimated completion date and time if the job were started immediately is displayed.
•
When building, the build's estimated completion date and time is displayed.
The outer build progress ring will vary depending on whether the printer is idle or building:
•
When idle, no progress is indicated within the build progress ring.
•
As build progress is made, the build's percentage of completion is displayed by radially filling in the
outer progress ring, in a clockwise direction. This percentage will coincide with the numerical
percentage displayed within the upper portion of the Build Status Display.
Figure 4-11:
Build Status Display Details
Build progress ring - idle
As you scroll through jobs in the queue, information within the Build Status Display will update to reflect the
selected job. (See
"Selecting a Print Job from the Build Page" on page 55
selected and a build is started, the information within the Build Status Display will update frequently to indicate
build progress.
Build progress ring - building
for more information.) Once a job is
57
Advertisement
Table of Contents
