Table of Contents
Advertisement
MATERIAL LOAD/UNLOAD CANCELLATION
After pressing the Unload Material or Load Material button for a canister, the Cancel button becomes selectable.
This button allows you to cancel a material load or unload already in process. Depending on your printer's
configuration, a warning may be generated after selecting the Cancel button. In the event of a warning the Build
State Button will turn yellow. Pressing the Build State Button will open a dialog indicating the reason(s) for the
warning.
TIPS CONTROLS
Three buttons are displayed at the bottom of the Tips page (just above the Navigation Bar). These buttons are
used to initiate a variety of tip related functions.
Figure 4-29:
These buttons have the following functionality:
Table 4-13:
Tips Controls Buttons
Icon
Tips Controls
Name
Tip Change
(Wizard)
Tip Purge/Unplug
Tip Wipe
Adjustment
Description
Opens the Tip Change Wizard. The Tip Change
Wizard is a guided wizard which allows you to
change the printer's model and/or support materials
and tips.
See
"Tip Change Wizard"
for overview information
and
"Using the Tip Change Wizard" on page 128
detailed instructions.
Opens the Tip Maintenance Page. Within this page
you can:
- Initiate a tip unplug routine
- Perform a tip purge
- Enable/disable a tip's head button
- View model and support tip temperature
information
Opens the Tip Wipe Adjustment Page. Within this
page you can:
- Set the printer to its standby temperature
- Set the printer to its build temperature
- Move the head to the purge position
- Wipe tips
75
for
Advertisement
Table of Contents
