TOUCHSCREEN CALIBRATION
Caution: A stylus pen should be used when performing this calibration to ensure
precise calibration. Do not use your fingertip to perform this calibration. If a stylus
pen is not available, a pencil eraser may be used.
You have the option of recalibrating the printer's touchscreen display. Extreme care must be taken when
performing this calibration as an improperly calibrated touchscreen can lead to button accuracy issues.
To recalibrate the touchscreen:
1.
Open the Calibration page by pressing the Calibration button within the Navigation Bar.
Press the Touchscreen Calibration button within the Calibration page.
2.
3.
A dialog will be displayed asking you if you want to recalibrate the touchscreen, press the
checkmark button to confirm.
Figure 6-20:
Recalibrate Screen Confirmation Page
209