5.
Based on the support material you selected in the previous step, a list of compatible support tip
options will be displayed. From the list of support tip options displayed select the support tip
you'd like to switch to (T12(current) in this case). Press the Next button to proceed with the
wizard.
Note: When selecting the tip you'd like to switch to you are given a "current"
(i.e. T12 (current)) and "new" (i.e. T12 (new)) option for the tip size currently
installed in the printer (if applicable). If the currently installed tip is compatible
with the material type you're switching to you can reuse the tip; however, you
may only reuse one tip. For example, if you chose to reuse the currently installed
model tip in
step 3
you must select a new support tip.
132