Materials Status - Stratasys K6 Series User Manual

MATERIALS STATUS

You can find the current status of each of the canisters installed/inserted in the printer via two methods:
1. The Dashboard contains two Material Status Icons, one corresponding to the printer's model
canister (M) and one corresponding to the printer's support canister (S). (See
Status" on page 50
M), the name of the material currently installed in that bay (e.g. ABS-M30), and the current
volume of material in that canister (e.g. 92.1 in
Selecting the Tips button within the Navigation Bar will open the Tips page. Two Material Status
2.
Icons, one corresponding to the printer's model canister (M) and one corresponding to the
printer's support canister (S) are displayed within the lower portion of the page (see
Materials Status" on page 69
canister bay (e.g. M), the name of the material currently installed in that bay (e.g. ABS-M30), and
the current volume of material in that canister (e.g. 92.1 in
Figure 5-36:
for details). Each icon displays the material's associated canister bay (e.g.
for details). Each of these icons displays the material's associated
Materials Status Locations
3 3
/1509.2 cm ).
3
/1509.2 cm
180
"Materials/Tips
"Tips/
3
).