Navigation Bar - Stratasys K6 Series User Manual

NAVIGATION BAR

The Navigation Bar appears on each main page of the User Interface, and provides one-touch access to the
Build, Queue, Tips, Calibration, Settings, and Maintenance functions of the printer. The User Interface is broken
up into several pages of related functionality. Selecting a button from the Navigation Bar will open the button's
corresponding page, allowing you to perform tasks within that page.
If a page contains sub-pages or wizards, additional buttons corresponding to these items will be displayed just
above the Navigation Bar within the page's Display Area.
Note: The Navigation Bar is hidden whenever you are working within a wizard (a
multi-step activity that is altering the system state and cannot be interrupted via
general navigation). Wizards are defined within the context of their main page
(i.e. the Tip Change Wizard is within the Tips page).
Figure 4-5: Navigation Bar
The buttons in the Navigation Bar are mutually exclusive, meaning only one button may be selected at any
given time. In some instances, all of the buttons in the Navigation Bar will be disabled. Buttons can appear as
follows:
Table 4-5: Navigation Bar - Button States
Button Name
Build Button
Queue Button
Tips Button
Calibration Button
Settings Button
Maintenance Button
Selected State Unselected State
53
Disabled State