Stratasys K6 Series User Manual page 264

Condition Possible Cause
Material oozing Dryer failure.
Moisture in the canister.
Oven not maintaining Heater failure.
temperatures
Oven door open.
Oven door not sealing.
Remedy
Contact Customer Support or your regional
Stratasys office (see
for contact information).
Contact Customer Support or your regional
Stratasys office (see
for contact information).
Contact Customer Support or your regional
Stratasys office (see
for contact information).
Close the oven door; the heater turns off while
the door is open.
Check oven door seal and verify that it is
securely affixed to oven door frame and does not
exhibit cuts/tears.
If excessive wear is visible, Contact Customer
Support or your regional Stratasys office (see
"Getting Help" on page 242
information).
255
"Getting Help" on page 242
"Getting Help" on page 242
"Getting Help" on page 242
for contact