Table of Contents
Advertisement
Note: All recent calibration data (i.e. tip offset values), printer settings/
configurations and material license information are automatically retained during
the software update process. Files sent to the Job Queue are not retained.
5.
Insert the Controller Software Update CD into the workstation PC and then transfer the .upg file
to a known location on the workstation's hard drive.
6.
From the workstation's Start Menu, navigate to All Programs > Insight (installed version) >
Control Center (installed version) or double-click the Control Center shortcut (if available). See
Figure 7-3 on page
7.
Within Control Center, select the Services tab. Ensure that your 380mc printer is selected from
the drop-down menu then click the Update Software button. (See
on page 212
if you cannot select your printer from the drop-down menu.)
Figure 7-20:
Update Software Button Location
8.
Control Center will begin establishing a connection with the printer. Once a connection is
established, the workstation PC's file explorer will open.
9.
Browse to the location of the .upg software update file that was transferred in
10.
Select the .upg file to be downloaded and then click Open. Control Center will begin sending
software to the printer. Progress is indicated within the bottom of the Control Center window.
Figure 7-21:
Software Download Progress
213.
"Add Printer to Control Center"
226
step
5.
Advertisement
Table of Contents
