Network Settings - Stratasys K6 Series User Manual

NETWORK SETTINGS

Within the Network Settings category of the Settings page you can configure your printer's UPnP and network
address information.
Note: Your printer was configured for your network as a part of its initial
installation and setup (see
information within this section is provided to help you understand the
functionality of the Network Settings portion of the Settings page.
Pressing the right arrow graphic within the Network row will open your printer's Network Settings Details page.
Figure 4-46:
Within this page you can set your printer's address type to DHCP (dynamic) or Static; DHCP is selected by
default. To configure this setting, use the slider graphic to select DHCP or Static. Press the Settings button in the
upper-left corner of the dialog to exit the Network Settings Details page and return to the Settings page.
Figure 4-47:
DHCP CONFIGURATION
When the Address Type is set to DHCP, a network server or PC will generate an IP address for the printer. A
different IP address may be generated from time to time by the server or PC. The generated IP address will be
displayed within the IP Address: field, and corresponding network mask and gateway address information will
also be displayed.
Open Network Settings Details Page
Network Settings Details Page
"Configuring the Network" on page
90
18). The