Table of Contents
Advertisement
ABOUT THE SAMPLE QUEUE
The 380mc comes with several sample job files permanently installed on the printer. These files are accessible
via the Sample Queue only. This queue is comprised of a few sample part files as well as a variety of other files
that are helpful for testing the printer. The majority of the files within the Sample Queue will be utilized only by
authorized service representatives when performing maintenance on the printer.
Overall, the functionality of the Sample Queue is the same as that of the Job Queue:
•
Individual jobs are listed in rows with columns indicating Job Name, Estimated Build Time, Material
Tip associated with the job, and Material type associated with the job. Please note that this
information is static and represents the details of the job as submitted to the printer via the Insight
application on your PC.
•
Up to 7 jobs are displayed within the Sample Queue list at a given time. If the queue contains more
than 7 jobs, use the scrollbar (to the right of the queue) to scroll up or down through the list of
available jobs.
•
To select a job, simply touch the corresponding row in the list; the row will turn blue. Once you've
selected a job, navigate back to the Build page (by pressing the Build button within the Navigation
Bar). The job you selected will be the displayed on the Build page and be queued for building.
•
Additional details for a job can be viewed by opening the job's Job Details page (see
Details" on page
However, the following functionality differences exist for the Sample Queue:
•
Job Queue Controls
deleted.
•
Jobs in the Sample Queue cannot be sorted (as described within the
66).
are disabled for the Sample Queue, and therefore these job files cannot be
67
"Viewing Job
Job Queue Sorting
section).
Advertisement
Table of Contents
