Stratasys K6 Series User Manual page 230

4. The following is displayed on the touchscreen while the printer is in Software Upgrade Mode. A
radial progress graphic is displayed within the lower portion of the page, indicating that the printer
is in Software Upgrade Mode and waiting to receive the software upgrade. The text displayed
within this section of the page will update as upgrade progress is made.
Figure 7-13: Software Upgrade Mode
Note: All recent calibration data (i.e. tip offset values), printer settings/
configurations and material license information are automatically retained during
the software update process. Files sent to the Job Queue are not retained.
221
Software
upgrade
progress
displayed
here