Print Job Status - Stratasys K6 Series User Manual

If the job shown in the Print Job Information Panel is from the Sample Queue, the left and right Print Job
Selection buttons still step through the Job Queue, starting at the top of the queue, and the information for the
sample job is replaced. The left and right Print Job Selection buttons do not step through the jobs in the Sample
Queue at any time.
When the printer is building, the Print Job Selection buttons are disabled as shown in
Figure 4-9. This is also how the Print Job Selection buttons will appear if there are no jobs in the Job Queue.
Figure 4-9: Print Job Selection Buttons Disabled

PRINT JOB STATUS

The Print Job Status section of the Build page is comprised of a two-part graphic which provides information on
a selected and/or building job. The information displayed will vary depending on the state of the printer.
• The Build Status portion of this graphic displays the build's percentage of completion, number of
completed layers as compared to total number of layers, elapsed build time as compared to total
build time, expected build completion information, and build progress ring.
• The Materials Status portion of this graphic displays detailed material status information, for both
model and support material, as it pertains to a selected job.
Figure 4-10:
Build
Status
Print Job Status Overview
56
Materials
Status