Working With The Tips Page - Stratasys K6 Series User Manual

WORKING WITH THE TIPS PAGE

The Tips page displays a detailed representation of the printer's current materials and tips configuration. Two
Tip Status Icons and two Material Status Icons (similar to the icons within the Dashboard) represent the tips and
model/support material loaded/installed within the printer. These icons will take on a variety of colors and
highlighted states depending on their status.
Within this page you can view the current configuration of the printer including model and support tip size and
odometer values, current and set point tip temperatures and model and support material types, view canister
volumes and load statuses, load and unload materials, access the
Wizard, and perform a variety of tip maintenance functions.
To access the Tips page, press the Tips button within the Navigation Bar; a screen similar to the one in
25 will be displayed.
Figure 4-25: Tips Page
Tip Change Wizard
68
and Tip Wipe Adjust
Figure 4-
Tip Status Icons
Cancel Load /
Unload Button
Material Load
Controls
Material Status
Icons
Canister Load
Status
Tips Control
Buttons