When the printer is building an additional progress bar is displayed for both the model and support fields. This
light blue bar indicates build progress and reflects the amount of material used so far during the build.
In
Figure
4-16, the light blue progress bars indicate the amount of model and support material used so far. The
dark blue progress bars indicate the remaining amount of model and support required to complete the build.
There is sufficient material in the printer to complete this build, so no indication of additional material required (in
hashed-grey) is displayed.
Figure 4-16:
In
Figure
4-17, the light blue progress bars indicate the amount of model and support material used so far;
however, there is not sufficient material in the printer to complete this build. The dark blue progress bars indicate
the remaining amount of model and support available in the printer while the additional material required to
complete the build is indicated in hashed-grey.
Figure 4-17:
Materials Status Display Details - Building, Sufficient Materials
Materials Status Display Details - Building, Insufficient Materials
60