Stratasys K6 Series User Manual page 22

Figure 2-3: Welcome Kit Contents - Spare Parts
3
Table 2-3: Key for Figure 2-3
Oven Bulbs
1 Replacement Kit
Purge Ledge
2
Flicker and Brush
3 Assembly
Periodically you may need to replace an oven bulb. Bulbs generally burn out in pairs.
The Welcome Kit contains oven bulb replacement kits, with 2 replacement Festoon bulbs
per kit. See "Replace an Oven Bulb" on page 238
Once replacements are depleted, you will need to order additional bulb replacement kits.
Table 7-2 on page 229
See
The Welcome Kit contains replacement purge ledges (2). The purge ledge is part of the
tip wipe assembly which should be inspected once a week. Purge ledges should be
replaced whenever excessive buildup has accumulated on the ledge's surface. See
"Clean/Inspect Tip Wipe Assembly" on page 232
Once replacements are depleted, you will need to order additional replacement purge
Table 7-2 on page 229
ledges. See
The Welcome Kit contains replacement flicker/brush assemblies (4). The flicker and
brush are components of the tip wipe assembly and keep the liquefier tips free of debris
and material buildup. They should be inspected once a week and replaced as needed.
See "Clean/Inspect Tip Wipe Assembly" on page 232
wear.
Once replacements are depleted, you will need to order additional replacement
Table 7-2 on page 229
assemblies. See
1
2
for instructions.
for replacement consumable part
for instructions.
for replacement consumable part
instructions and explanations of
for replacement consumable part
13
numbers.
numbers.
numbers.