Stratasys K6 Series User Manual page 100

STATIC CONFIGURATION
When the Address Type is set to Static you must enter an IP address, network mask, and gateway address for
the printer (provided by the system administrator). Once entered, the address will not change.
Note: See your system administrator if you do not know the IP address,
Network mask, or Gateway address.
When Static is selected the Enter Network Settings pop-up dialog will be displayed. Within this dialog you must
manually configure the IP Address, Network mask, and Gateway fields using the keypad displayed. Simply
touch a field on the screen to select it and then use the keypad to enter address information.
Figure 4-48:
Backspace
(delete)
• Use the
• Use the
• Use the
•
Use the
Enter Network Settings Dialog
number keys
to enter address digits.
backspace
key to delete entries digit by digit.
checkmark
key to confirm entries and exit the dialog with saving.
X
key to exit the dialog without saving.
91
Exit
(without
saving)
Checkmark
(confirm)