Table of Contents
Advertisement
11.
A screen will be displayed momentarily indicating that the printer is preparing to have its tip(s)
replaced. Perform the necessary steps to replace model and/or support tips. See
"Changing Tips
within the Top Cover" on page 161
for detailed instructions on changing tips.
If a tip is removed that may be re-installed at a later time, be sure to record the tip's odometer
reading (item 4 in the image below) and store this reading with the removed tip. Once a new
model and/or support tip is installed, press the Next button to proceed with the wizard.
140
Advertisement
Table of Contents
