Table of Contents
Advertisement
Table 4-12:
Material Load Control Buttons - Button States
Button Name
Cancel Button
Load Material Button
Unload Material Button
As materials are loaded and unloaded, the pathway between the material and tip status icons will become blue
with a white highlighted border, and will fill in the direction that the canister's filament is traveling. The Cancel
button will become selectable giving you the option to cancel the material load/unload if necessary.
Material load progress will display the same functionality regardless of whether a model or support canister is
being loaded. Once a canister's material is loaded to the head, the pathway between the canister's Material
Status Icon and the corresponding Tip Status Icon will be fully (solid) highlighted and the canister's load status
will update to "Loaded". This indicates that the canister is selected and in position to be used to build parts on
the printer. The Unload Material button (down arrow) will become selectable, indicating that the canister can be
unloaded, if needed.
Material unload progress will display the same functionality regardless of whether a model or support canister is
being unloaded. Once a canister's material is unloaded from the head the pathway between the canister's
Material Status Icon and the corresponding Tip Status Icon will be solid black, and the canister's load status will
update to "Not Loaded". The Load Material button (up arrow) will become selectable, indicating that the canister
can be reloaded, if needed.
Figure 4-28:
Selected State
Material Load Progress Indicator
Unselected State
74
Disabled State
Advertisement
Table of Contents
