Touchscreen Calibration
Pressing the Touchscreen Calibration button will open a dialog allowing you to recalibrate
the touchscreen display. See
Figure 4-37:
Recalibrate Screen Confirmation Page
Find Z Home
Pressing the Z Home button instructs the printer to find its home location for the Z axis.
Note: This button can also be found within the Gantry/Stage Details page. See
"Gantry/Stage Settings" on page 98
Find XY Home
Pressing the XY Home button instructs the printer to find its X and Y Home locations. See
"XY Home Calibration" on page 203
Note: This button can also be found within the Gantry/Stage Details page. See
"Gantry/Stage Settings" on page 98
"Touchscreen Calibration" on page 201
for more information.
for more information.
for more information.
82
for detailed instructions.