UPDATING CONTROLLER SOFTWARE - CD METHOD
If the printer has a weak network connection or does not allow for automatic updates, you can manually
download Controller Software updates by performing the following steps:
Open the Maintenance page by pressing the Maintenance button within the Navigation Bar (see
1.
Figure 7-11 on page
2.
Locate the Update Software row within the page. Press the right arrow graphic within the row to
open the Update Software page (see
3.
Press the Upgrade System Software button within the Update Software page (see
page
221). This will automatically put the printer into Software Upgrade Mode, allowing it to
accept the software update.
4.
The following is displayed on the touchscreen while the printer is in Software Upgrade Mode.
Figure 7-19:
219).
Software Upgrade Mode
Figure 7-11 on page
219).
225
Figure 7-13 on