SETTING THE PRINTER'S DATE AND TIME
In order to ensure accurate build times, the printer's clock must be set. This is done within the FDM Control
Center application which was installed on your workstation PC as part of the installation process (see
Control Center Software" on page
1.
Open FDM Control Center by navigating to All Programs > Insight (installed version)>
Control Center (installed version) or double-clicking the Control Center shortcut (if available).
2.
Select the Services tab, and ensure that your 380mc is selected from the Name: drop-down
menu. If your printer is not available from the drop-down menu, you will need to add the printer
within Control Center, see
3.
Click the System Time button.
Figure 2-9:
System Time Button Location
45). Perform the following steps to set the 380mc's date and time:
"Add Printer to Control Center" on page 212
21
for instructions.
"FDM