About The Job Queue - Stratasys K6 Series User Manual

ABOUT THE JOB QUEUE

The Job Queue contains the list of files (jobs) downloaded to the printer from the Control Center application on
your workstation PC. By default, jobs are added to the Job Queue in the order they were submitted to the printer
via Control Center. Individual jobs are listed in rows, with columns indicating job name (Job Name), estimated
build time (Est. Build), model tip (Tip) associated with the job, and type of model material (Material) associated
with the job. Please note that this information is static and represents the details of the job as submitted to the
printer via the Control Center.
Up to 7 jobs are displayed within the Job Queue list at a given time. If the queue contains more than 7 jobs, use
the scrollbar (to the right of the queue) to scroll up or down through the list of available jobs.
To select a job, simply touch the corresponding row in the list; the row will turn blue. Once you've selected a job,
navigate back to the Build page (by pressing the Build button within the Navigation Bar). The details of the job
you selected will be displayed within the Build page and the job will be queued for building.
Figure 4-21: Job Queue
64