A.
Press the touchscreen anywhere within the Model field. When selected, the field will turn
blue.
B.
Using the keypad, enter the odometer value corresponding to your model tip; if necessary,
use the delete key to erase a field's default value. For this example, we will accept the
default value of 0.0 (in
C.
Repeat steps
A.
and
example, we will use the keypad to enter a value of
3
15.5 (in
) for the support tip.
Confirm that the tip odometer information you entered is correct and then press the Next
D.
button to proceed with the wizard.
Delete
Key
Note: Depending on the printer's current oven temperature, oven temperature
may need to stabilize following this step. A screen displaying "Checking Oven
Temperature" may be displayed momentarily.
3
).
B.
as needed to update the support tip's odometer information. For this
142