Rj-45 Management Port Connector Pinout Information; Rj-45 Port, Sfp Port, And Sfp+ Port Connector Pinouts - Juniper EX4100 Hardware Manual

• If the switch is running Junos OS Release 9.5 or earlier, the formatting method must use a primary
boot record. Microsoft Windows formatting, by default, does not use a primary boot record. See the
documentation for your USB flash drive for information about how your USB flash drive is formatted.

RJ-45 Management Port Connector Pinout Information

Table 34 on page 112 provides the pinout information for the RJ-45 connector for the management port
on Juniper Networks devices.
Table 34: RJ-45 Management Port Connector Pinout Information
Pin
1
2
3
4
5
6
7
8

RJ-45 Port, SFP Port, and SFP+ Port Connector Pinouts

The following tables describe the connector pinout information for the RJ-45, SFP+, and SFP ports:
Signal
TRP1+
TRP1-
TRP2+
TRP3+
TRP3-
TRP2-
TRP4+
TRP4-
Description
Transmit/receive data pair 1
Transmit/receive data pair 1
Transmit/receive data pair 2
Transmit/receive data pair 3
Transmit/receive data pair 3
Transmit/receive data pair 2
Transmit/receive data pair 4
Transmit/receive data pair 4
112