Ex4200 Site Guidelines And Requirements - Juniper EX4200 Hardware Manual

Table 17: Site Preparation Checklist (continued)
Item or Task
Verify that the wall meets the minimum
requirements for the installation of the
switch.
Verify that there is appropriate clearance in
your selected location.
Cables
Acquire cables and connectors:
Determine the number of cables needed
based on your planned configuration.
Review the maximum distance supported
for each cable. Choose the length of cable
based on the distance between the
hardware components being connected.
Plan the cable routing and management.

EX4200 Site Guidelines and Requirements

IN THIS SECTION
Environmental Requirements and Specifications for EX Series Switches | 60
General Site Guidelines | 65
Site Electrical Wiring Guidelines | 65
Rack Requirements | 66
Cabinet Requirements | 67
Requirements for Mounting an EX4200 Switch on a Desktop or Wall | 68
Clearance Requirements for Airflow and Hardware Maintenance for EX4200 Switches | 69
For More Information
"Requirements for Mounting an EX4200 Switch on a Desktop or Wall" on page 68
"Clearance Requirements for Airflow and Hardware Maintenance for EX4200 Switches"
59