Table of Contents
Advertisement
System cabling
...................................................................................................................................................................................................................................
Figure 4-28 DS3 cables
ote: The routing of the DS3 cables should be in accordance with the recommended
practices of the cables selected. The cables should be strain relieved to prevent any
force from being exerted on the connectors.
LAN interfaces (X8PL, and X5IP cards)
Purpose
Ethernet LA cables (10/100/1000Base-T) can be connected to these interfaces.
Connector data
The LA connectors which are located on the X8PL, and X5IP option cards are 8-pin
RJ45 connectors with metal shell for grounding.
Figure 4-29 LAN connector
Table 4-14
Point on connector
...................................................................................................................................................................................................................................
4-28
Pin assignment (LAN cables - E/FE)
1
TX P
2
TX
3
RX P
4
nc
5
nc
6
RX
7
nc
8
nc
Alcatel-Lucent – Internal
Proprietary – Use pursuant to Company instruction
Signal name
Transmit-data positive
Transmit-data negative
Receive-data positive
Receive-data negative
Option card cable installation
E3/DS3 interfaces (X3E3DS3 card)
Description
ot connected
ot connected
ot connected
ot connected
365-313-103R8.0
Issue 2 July 2009
Advertisement
Chapters
Table of Contents
