Timing Of Setting Of Overflow Flag (Ovf) - Hitachi H8/3032 Series Hardware Manual

Downloaded from Elcodis.com electronic components distributor

10.3.3 Timing of Setting of Overflow Flag (OVF)

Figure 10-6 shows the timing of setting of the OVF flag in TCSR. The OVF flag is set to 1 when
TCNT overflows. At the same time, a reset signal is generated in watchdog timer operation, or an
interval timer interrupt is generated in interval timer operation.
ø
TCNT
Overflow signal
OVF
Figure 10-6 Timing of Setting of OVF
H'FF H'00
307