Hitachi H8/3032 Series Hardware Manual page 234

Downloaded from Elcodis.com electronic components distributor
• Input capture signal timing
Input capture on the rising edge, falling edge, or both edges can be selected by settings in
TIOR. Figure 8-25 shows the timing when the rising edge is selected. The pulse width of the
input capture signal must be at least 1.5 system clocks for single-edge capture, and 2.5 system
clocks for capture of both edges.
ø
Input-capture input
Internal input
capture signal
TCNT
GRA, GRB
Figure 8-25 Input Capture Signal Timing
N
219
N