Table of Contents
Advertisement
•
•
Sample Buffering Setup Procedure: Figure 8-48 shows a sample buffering setup procedure.
Downloaded from
Elcodis.com
electronic components distributor
Complementary PWM mode
The buffer register value is transferred to the general register when TCNT3 and TCNT4
change counting direction. This occurs at the following two times:
— When TCNT3 matches GRA3
— When TCNT4 underflows
Reset-synchronized PWM mode
The buffer register value is transferred to the general register at compare match A3.
Buffering
Select general register functions
Set buffer bits
Start counters
Buffered operation
Figure 8-48 Buffering Setup Procedure (Example)
1
1.
Set TIOR to select the output compare or input
capture function of the general registers.
2.
Set bits BFA3, BFA4, BFB3, and BFB4 in TFCR
to select buffering of the required general registers.
2
Set the STR bits to 1 in TSTR to start the timer
3.
counters.
3
242
Advertisement
Table of Contents
