Hitachi H8/3032 Series Hardware Manual page 44

Downloaded from Elcodis.com electronic components distributor
Table 2-3 Data Transfer Instructions
Instruction Size* Function
(EAs) → Rd, Rs → (EAd)
MOV B/W/L
Moves data between two general registers or between a general register
and memory, or moves immediate data to a general register.
(EAs) → Rd
MOVFPE B
Cannot be used in the H8/3032.
Rs → (EAs)
MOVTPE B
Cannot be used in the H8/3032.
@SP+ → Rn
POP W/L
Pops a general register from the stack. POP.W Rn is identical to MOV.W
@SP+, Rn. Similarly, POP.L ERn is identical to MOV.L @SP+, ERn.
Rn → @–SP
PUSH W/L
Pushes a general register onto the stack. PUSH.W Rn is identical to MOV.W
Rn, @–SP. Similarly, PUSH.L ERn is identical to MOV.L ERn, @–SP.
Note: * Size refers to the operand size.
B: Byte
W: Word
L: Longword
29