Hitachi H8/3032 Series Hardware Manual page 52

Downloaded from Elcodis.com electronic components distributor
Table 2-10 Block Transfer Instruction
Instruction Size Function
if R4L ≠ 0 then
EEPMOV.B —
repeat @ER5+ → @ER6+, R4L – 1 → R4L
until
else next;
if R4 ≠ 0 then
EEPMOV.W —
repeat @ER5+ → @ER6+, R4 – 1 → R4
until
else next;
Transfers a data block according to parameters set in general registers R4L
or R4, ER5, and ER6.
R4L or R4: Size of block (bytes)
ER5:
ER6:
Execution of the next instruction begins as soon as the transfer is
completed.
R4L = 0
R4 = 0
Starting source address
Starting destination address
37