Table of Contents
Advertisement
9.1
Applying Effects to a Sound, a Group or the Master
The procedures for applying an effect at the Sound, Group or Master level are very similar.
Hardware
1.
Press the
CONTROL
2.
If you want to apply the effect to the Master (to process the audio of the whole Project),
press Button 1 to select the
3.
If you want to apply the effect to a Group (to process the audio of the whole Group), press
Button 2 to select the
desired Group.
4.
If you want to apply the effect to a Sound, press Button 3 to select the
the Group button
of that Sound (or simply hit its pad if pads are in Group mode).
5.
Make sure
MODULES
play.
6.
Press Button 5–8 to select Module slot
derneath).
7.
Press
SHIFT
+
BROWSE
8.
On the left display, use Knob 1 to set the
PLUG-IN
for VST/AU effect plug-ins.
The right display now shows the list of the corresponding Modules (MASCHINE effects in
the example underneath).
9.
Turn Knob 5 to browse the available Modules.
button to select the Control mode.
MASTER
tab.
GROUP
tab and press the Group button
A–H
of the Group containing that Sound, and press
(Button 4) is activated to show Module slots
1–4
to open the Module list and browse the available effect Modules.
Applying Effects to a Sound, a Group or the Master
A–H
(Module slot
3
of a Group in the example un-
TYPE
to
INTERNAL
for MASCHINE effects or
MASCHINE MIKRO MK2 - Manual - 245
Using Effects
corresponding to the
SOUND
tab, press
SELECT
+ the pad
1
to
4
on the right dis-
Advertisement
Table of Contents
