Creating A Send Effect; Setting Up A Sound As Send Effect - Native Instruments MASCHINE MIKRO MK2 Manual

4. Click the tab of Module slot
down arrow at the upper right corner of the tab).
Now the external audio will be processed by the effect!
→
9.4

Creating a Send Effect

Sometimes you may want to have a classic send effect, for example a reverb which can be
shared by multiple sound sources. To make use of a send effect, you need to:
▪ Set up a Sound as send effect. This is done by loading an effect into its first Module slot.
▪ Route a portion of the desired audio signals from their original Sounds and Groups to that
send effect. This is done via the Output Properties of the corresponding Sounds and
Groups.
The following sections describe these two tasks in more detail.
9.4.1

Setting up a Sound as Send Effect

The procedure to set up a Sound as a send effect is straightforward: You just need to load an
effect instead of an instrument into its first Module slot — MASCHINE will take care of the
rest!
2 and select an effect from its Module menu (using the drop-
Creating a Send Effect
MASCHINE MIKRO MK2 - Manual - 255
Using Effects